Sensor Automatic Toilet Flusher

built-in-wall type with stainless steel body, low consumption, intelligent adjusting induction rang , self-cleaning electromagnetic valve

I.Adopt new generation electromagnetic valve with specifications as below:

1.Adjust Water Volume (Own patented technology)

   No need to install separate water volume adjust valve but by using electromagnetic valve effectively diminish the dimension of whole box which fits all kind of walls with breadth.

2. Proper Intellectualized

    Don’t touch any entity, user can make it through induction way to choose the distance and time of flushing. (default standard state)

3.Auto Clean Ability

   Special design of auto clean structure could automatically clean up the impurities remained in electromagnetic valve which effectively avoid the matter of periodic manual clean and maintenance.

4. Water-saving

Sensor controlled two in-turn flush could prominently save water.

5. Sanitarian

    No factitious intervened flush could be convenient and sanitarian while avoid germ cross infection.

6. Power-saving

No need to replace battery in two and a half years with 100 flushes per day powered by 4 pieces of size AA alkali battery; keep working during power cut if adopted AC/DC series products.

7.Strink Refluence Prevention

   Flush valve will wash urinal every 24 hours if urinal keep nonuse for a long time to prevent stink refluence due to the dry up of drainage.

II.Using Introduction

Power: DC 6V / AC 220V

Power Consumption: Static State: <0.6 mW

                                  Dynamic State:<270mW

Sensitivity: first Induction Time<10s; the next Induction Time<5s if the interval between the two inductions<60min ; the next Induction Time<10s if  the interval  between the two inductions＞60min.

Induction Distance: 70±5cm

Water Supply Pressure: 0.02~0.6 Mpa

Environment Temperature: 0~55°C

Water Supply Temperature: 0~50°C

In Water Pipe Diameter: Φ32mm/G 1”

Pre-embedded Box Dimension:  (L) 125´(W) 115´(H) 110mm