Senser Automatic Hand Washer

Built-in-wall Type with Stainless Steel Body,Low Consumption,Electromagnetic Valve

I. Functions&Features

1.Proper Intellectualized

   Don’t touch any entity, user can make it through induction way to choose the distance and time of flushing. (default standard state)

2.Sanitarian

   No factitious intervened flush could be convenient and sanitarian while avoid germ cross infection.

3.Water-saving

   Sensor controlled two in-turn flush could prominently save water.

4.Power-saving

    No need to replace battery in two and a half years with 100 flushes per day powered by 4 pieces of size AA alkali battery; keep working during power cut if adopted AC/DC series products.

5.Purify Water Quality

   Special installed filter web could effectively clear out impurities in water such as sandstone, etc.

6.Super Slim Design

    Pre-embeded super slim design specially fits the thin wall (6cm) installation.

7. The water leakage may freely revole.

II. Using Introduction

Power: DC 6V / AC 220V

Power consumption: Static State: <0.6 mW

                                  Dynamic State:<270mW

Sensitivity: first Induction Time<2.3s; the next Induction Time<0.7s if the interval between the two inductions<10min ; the next Induction Time<2.3s if  the interval  between the two inductions＞10min.

Induction distance: 50±5cm

Water supply pressure: 0.02~0.6 Mpa

Environment temperature: 0~55°C

Water supply temperature: 0~50°C

In water pipe diameter: Φ15mm/G (1/2)”

Pre-embeded Box Dimension: (L) 180´(W) 115´(H) 60mm