Sensor Automatic Urinal Flusher

built-in-wall type with stainless steel body, low consumption, self-cleaning electromagnetic valve, slim-thin protective box

I. Funtions&Features

1.Proper Intellectualized

Don’t touch any entity, user can make it through induction way to choose the distance and time of flushing. (default standard state)

2.Water-saving

Sensor controlled two in-turn flush could prominently save water.

3.Sanitarian

No factitious intervened flush could be convenient and sanitarian while avoid germ cross infection.

4.Power-saving

No need to replace battery in two and a half years with 100 flushes per day powered by 4 pieces of size AA alkali battery; keep working during power cut if adopted AC/DC series products.

5.Purify Water Quality

Special installed filter web could effectively clear out impurities in water such as sandstone, etc.

6.Stink Refluence Prevention

Flush valve will wash urinal every 24 hours if urinal keep nonuse for a long time to prevent stink refluence due to the dry up of drainage.

7.The Water Temperature May Adjust

II. Using Introduction

Power: DC 6V / AC 220V

Power Consumption: Static State: <0.6 mW

                                    Dynamic State:<270mW

Sensitivity: first Induction Time<8s; the next Induction Time<4s if the interval between the two inductions<30min ; the next Induction Time<8s if  the interval  between the two inductions＞30min.

Induction Distance: 70±5cm

Water Supply Pressure: 0.02~0.6 Mpa

Environment Temperature: 0~55°C

Water supply Temperature: 0~50°C

In Water Pipe Diameter: Φ15mm/G (1/2)”

Pre-embeded Box Dimension: (L) 180´(W) 115´(H) 60mm