sensor Automatic Ceramic Urinal Flusher

wall-hung type, low consumption,  self-cleaning electromagnetic valve

I. Fuction&Feature

1.Integrated Design

   Integrated design for sensor and urinal brings tidy appearance while prevent equipment from damage in public areas. Easy to install and fits best to venue in which decoration is highly required.

2. Proper Intellectualized

    Don’t touch any entity, user can make it through induction way to choose the distance and time of flushing. (default standard state)

3.Water-saving

    Sensor controlled two in-turn flush could prominently save water.

4.Sanitarian

   No factitious intervened flush could be convenient and sanitarian while avoid germ cross infection.

5. Purify Water Quality

    Special installed filter web could effectively clear out impurities in water such as sandstone, etc.

6. Power-saving

    No need to replace battery in two and a half years with 100 flushes per day powered by 4 pieces of size AA alkali battery; keep working during power cut if adopted AC/DC series products.

7. Strink Refluence Prevention

    Flush valve will wash urinal every 24 hours if urinal keep nonuse for a long time to prevent stink refluence due to the dry up of drainage.

The water volume may adjust and may alone close the current of water.

II. Using Introduction:

Power: DC 6V / AC 220V

Power   Consumption: Static State: <0.6 mW

                                     Dynamic State:<270mW

Sensitivity: first Induction Time<8s; the next Induction Time<4s if the interval between the two inductions<30min ; the next Induction Time<8s if  the interval  between the two inductions＞30min.

Induction Distance: 70±5cm

Water Supply Pressure: 0.02~0.6 Mpa

Environment Temperature: 0~55°C

Water Supply Temperature: 0~50°C

In Water Pipe Diameter: Φ15mm/G (1/2)”

Dimension: (L)690 ´(W) 420´(H) 320mm